Limited Edition AIMPOINT® COMPM4S / COMP M4S (2 MOA) (12172)
This is the Limited Edition Model of the Aimpoint CompM4S! It includes the CompM4 scope, Picatinny Rail Mount, AR Rifle Spacer, Killflash, and Rubber Lens Covers!
The only difference between the CompM4 and the CompM4S is the position of the illumination adjustment dial. The CompM4S illumination adjustment dial is placed in optimal position for right handed shooters.
The CompM4S is now the latest version of the US Army’s M68 CCO (Close-Combat Optic), continuing a legacy that Aimpoint has maintained since 1997. The CompM4S is the finest sight that Aimpoint has ever produced. Improvements include improved energy efficiency that provides up to 8 years of continuous use from a single AA battery! The CompM4S incorporates an integral mount that eliminates the need for a separate ring, and can be customized with vertical and forward spacers to fit a variety of weapon systems.
The performance of the CompM4S is optimized for use with all generations of night vision devices (NVDs), but is especially suited for 3rd generation night vision technology. Aimpoint’s unique band-pass coating on the front lens reflects select frequencies of red light at near 100% efficiency in order to give the highest possible dot brightness with the smallest amount of energy while transmitting nearly 100% of light in the Infrared and near-infrared part of the spectrum to provide the clearest, brightest image possible when used with a 3rd generation NVD. With 7 NVD-compatible brightness settings and 9 Daylight settings including one extra-bright setting, the CompM4S is ready for use around the clock.
Unique features for the CompM4S
-Compatible with every generation of Night Vision Devices (NVD).
-Super ACET technology allows up to 80,000 hours (over 8 years) of daytime operation on one AA battery.
-Internal voltage regulator allows the CompM4 to be used with any AA size battery.
-Seven night vision compatible settings and 9 daylight settings.
-QRP2 mount has twice the clamping force of the original QRP.
-The new QRP mounting knob is wider and shorter to improve operation, and lessen the chance of becoming snagged on other gear.
-Mount base is “keyed” into to the body of the sight to absorb recoil.
-Mount base screws directly into the sight – no separate sight ring is required.
-500,000 hours of use on NVD setting.
-2 MOA dot for close combat and long distance engagement.
-Matches perfectly with Aimpoint 3XMag, (magnifier module).
-Unequalled light transmission.
-Front lens opening is threaded for addition of killFlash® anti-reflective device.
-Submersible to 150 feet (45 meters)
-Vertical spacer included.
-Standardized as the US Army’s new M68CCO.
-Improved adjustment caps are easier to remove, and are protected against impact.
-Can be used with a carry handle adaptor for use on all M16 rifles.
-System: Passive Red Dot Collimator Reflex Sight
-Eye Relief: Unlimited
-Reticle Size: 2 MOA
-Optical Coating: Anti Reflex coating all surfaces. Multi-layer coating for reflection of red light. Band Pass coating for NVD compatibility
-Battery Type: AA (You can use ANY AA battery, no special batteries needed!)
-Battery Life, Typical**: 80 000 hours for a Good Quality AA Battery
-Dot Brightness: 16 positions, 7 NVD, 9 daylight (1 is Extra Bright)
-Housing Material: Extruded High Strength Aluminum
-Surface Finish: Hard Anodized, Matte, Black
-Lens Cover Material: Rubber, Black Matte
-Adjustment: 1 click = 16 mm at 100 meters = ½" at 80 yds
-Mount: Picatinny Rail Mount INCLUDED (Patent Pending new mount keyed to the sight body that absorbs recoil)
-Length: 120 mm (4.7")
-Width / Height: 53x60 mm (2.1"x2.4") sight only - 72x72 mm (2.8"x2.8") including mount
-Ring Width: None (integrated with Picatinny Mount)
-Weight: 265 g (9.3 oz) sight only - 335 g (11.8 oz) with integrated mount
-Temperature Range: -45 oC to +71 oC (-50 oF to +160 oF)
-Water Resistance: 45 m (150ft)
Discount Accessory Information
Unlike most retailers, we don’t just list some random “accessories” you can pickup with this Aimpoint Comp scope. We specifically researched and selected these accessories for both added benefits and product compatibility. You can be assured that these are high quality accessories, made by the top accessory manufacturers, and they’re designed specifically to be used with this Aimpoint Comp scope.
These accessories are designed to enhance this product and are offered at an exclusive discount price if you order them with this product. At MilitaryWarfighter.com we go the extra mile to make sure you get exactly what you need!
Export: The Export of this product without proper licensing is strictly prohibited and falls under ITAR per title 22, CFR, parts 120-130. Please contact manufacturer's Export Dept. to receive further information on how to obtain proper licensing from the U.S. Department of State.